Testing your water is a basic requirement before a reverse osmosis system is installed. Balanced reverse osmosis system reviews contemplate the need for a number of reasons why testing your water is beneficial to you. Many governments have made it very clear that before you consume water fromany source it is advisable to have it checked at your nearest lab. This will help your health, the health of your loved ones and friends. The benefits include avoiding health risks such as poisoning, damage to your water pipes and other equipment. Installation of water purification systems has become an option to many and the reverse osmosis system is quite common.
On the other hand having a RO system installed is great since it means clean and safe water for your daily use. But here are a number of things that you need to consider before you install the system and the most important of all is testing the water. Many people believe that once you have your water purifier system installed you have no reason to test the water from your local source. Regardless of the need of the water testing it is a must to avoid damage to your water purification system. Soft water is recommended for an RO system and it helps you avoid having to deal with the unpleasantness that hard water presents when used in an RO system. So why is testing an important before you install your system? Here are some of the most common issues are dealt with when you test the water.
It reduces blockage
If you have your water tested then you will know it is hard water. Hard water is known to contain a lot of minerals and other substances and since the work of the RO membrane is to filter out some, if not most, of the substances from the water. If these substances are many then the membrane will be overloaded leading to blockage and eventually busting of the drainage pipes. Testing will tell you if the water is in need of softening to avoid this problem.
When you know what is required in you water before passing it through a reverse osmosis then you will avoid damaging your system and having to buy another system so soon after installing the previous one. If you do not test the water and it causes damage to system, you might be required to buy some parts that are damaged and even hire the services of a technician to do some repair on it. Plus it is know that had water can cause erosion to your system and damages
Enjoy good pressure
Hard water causes scaling which causes the pressure to drop to its lowest. If the water is softened, this problem can be avoided and you can enjoy clean water with the optimum pressure.
Choosing the type of filter
Knowing your water composition will help you know what is to be removed from the water and what type of filter you will need to remove the impurities in the water. Different impurities require different levels of filtering and this will go a long way in preventing you from wasting your money on the wrong type of filter.
Protection from poisoning
Water from a tap cannot be guaranteed of its safety since the pipes in which they run in are old and may corrode leaving you exposed to poisoning. It is best to test the water so that you can know what you are to protect yourself from.
Helps you save energy
Once you are well informed of the content of the water, it becomes easier to deal with the fact that hard water requires a lot of energy to purify. If the water is softened in advance, then you will save energy in your RO system.
These are but a few of the many benefits you can get once you have your water tested. Having a reverse osmosis system is good; but if you neglect the basic step of testing you water before installing your system, you are bound to have tough times using the same system and also maintaining it.